Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate

 1 in stock

Polished aluminium alternator cover

This is the deeper alternator cover which is suitable for models with Ducati and Saprisa charging systems. See SSA06030 for stainless steel mounting bolts (4 required)

 This part is due back in stock soon, call 01484 841395 to reserve yours

18001650-z 18001650 GU18001650 18 00 16 50
 1800 1650 1800.1650 18.00.16.50

Chrome twin pull Tommaselli 2c twist grip. Includes a pair of handlebar grips, for bikes with dual throttle cables from the bars

As originally fitted to pre 1979 T3's. Not suitable for carbs larger than 36mm (the twistgrip inner will require minor modification to operate PHM40s). This twistgrip can be used on almost any model with suitable custom cables. See ACA14450 for spare rubber. Holes for throttle cable elbow may be smaller than the original and need carefully enlarging with a drill or round file.

 1 in stock

 14603450 GU14603450 14 60 34 50
 1460 3450 1460.3450 14.60.34.50

Stainless steel fasteners kit for VHB carb models with sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike

This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 149 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)

 3 in stock

Stainless steel fasteners kit for VHB carb models without sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike

This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 145 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)

 3 in stock

Universal rack for mounting H & B top cases to luggage racks which don't have the H & B fitting. Includes grab rail, finished in black.

Because this is a universal rack you may need to do some additional drilling and obtain extra fasteners depending upon which type of luggage rack you are fitting this to

 This part is available by special order, request a quote

Polished aluminium alternator cover

For big twins with Bosch charging systems only. Not deep enough for later bikes with Ducati or Saprisa. See ACA18650 for deeper version.

 This part is available by special order, request a quote

18001650-z 18001650 GU18001650 18 00 16 50
 1800 1650 1800.1650 18.00.16.50

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For square barrel 850, 1000 and 1100 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations.

 3 in stock

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For round barrel 850 and 1000 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations, these protectors are exclusive to Gutsibits

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For round barrel 850 and 1000 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations, these protectors are exclusive to Gutsibits

 This part is due back in stock soon, call 01484 841395 to reserve yours